Replace Lock in UPVC Door

If you've got a upvc door lock that isn't functioning correctly, you need to call a professional locksmith. They are quick efficient and will complete the task to a high standard.

It's not difficult to change an upvc bar lock. You just need to know what is involved and follow the steps below.

Remove the barrel lock

upvc door replacement lock doors and Repair My Windows And Doors are popular in a variety of homes. They are ideal for letting sunlight into your home and are easy to open with the correct key. Switching the barrel of a lock on an uPVC door is an easy task that takes only five minutes. It is a quick fix if you have lost your keys, a tenant has moved out and has not returned it, or the lock barrel is damaged.

The first thing to do is to remove the handle screws. The handles will be removed of the way so that you can access the screws that hold the barrel of lock. You should not loosen the screws quickly since this could cause damage to the handles.

After the screws have been removed, locate the screw on the inside of the door that is holding the barrel lock in place. The screw is different in color from the other screws on your door and sticks out. Using an Phillips screwdriver, remove the screw. Next, take the present key used to lock the lock and put it in the barrel. Then, turn it to the right as much as you can. This will let the barrel go which makes it easier to open the door.

After loosening the screw, you can now break the pins that hold the Euro Cylinder. To do this, you will need strong pliers or mole grips. Take the protruding portion of the euro cylinder and bend it from side to side, and then up and down. This will break the two support pins that are holding it in place.

Once the old cylinder is gone, you can start the process of installing the new one. To ensure you order the right replacement, you need to first measure the lock cylinder. You can do this by measuring the distance between the center of circular keyhole and the middle of the square spindle. The measurement should be taken at the top of the spindle.

Change the Cylinder

The euro cylinder is the principal locking mechanism in doors made of upvc. It is simple to replace and doesn't require a handyman or locksmith. In fact, if yours isn't anti-snap or anti-bump it should be changed to one that has this protection included. They aren't expensive and could save you money and hassle in the case that your locks have been compromised.

Open the door and stand in the front. This will allow you to easily reach the screws that hold the handle with your hand or an appropriate tool. Let it loosen a bit or maybe one quarter turn to get the job started.

The cylinder will be easily removed since the screw will stop holding it in its place. The next step is to determine the size of replacement cylinder you need. There are around 25 different sizes. You should bring your old cylinder with you when you purchase one new to ensure it fits.

If you are not certain of the size then take a measurement from the center of the screw hole to the end of the cylinder. This is the only way to be sure you are getting the right size cylinder for your Upvc doors.

Install the new cylinder on your door in the opposite direction you removed the old one. Aligning the lock cam could be tricky but it's generally an issue of alignment.

Now you must screw the long screw for securing back into its place. Once this is done you can test the new cylinder and ensure that it is secured inside the door. If you're satisfied with how secure it is, you can reconnect the handle and close the door to test again. If all is well then the cylinder lock inside your upvc door has been changed and you should have added a second layer of security to your home.

Change the handle

There are many reasons why the door lock replacement knob or handle may become loose. This could be due to wear and tear of the handle itself, or it can be caused by the square spindle in the handle becoming worn or damaged by excessive use or repair My Windows and doors force. In this case the door handle will need to be replaced.

It is important that the door be propped open so it cannot close between removing the handle and replacing upvc door lock it. Then remove the screws from the inner side of the handle plate by using a screwdriver. This will release your handle from the plate. Be careful not to loose these screws as they will require re-screwing into place later.

You can now take off the handles to get access to the cylinder lock inside the door. The cylinder lock will be round or bulb-shaped and is only used in multi-point locks on upvc and some aluminum doors. The procedure for changing the cylinder is similar to the process of changing the handle except you'll need to remove the old cylinder from the door and replace it with a brand new one.

When selecting the replacement handle, it's important to consider the size. Be sure that the handle is identical in size to the original as it will have to fit over the existing screws that secure the handle. A good place to start is by referring to a size matrix that will provide the standard sizes of replacement handles, as well as their keyhole center to handle plate distance.

Consider upgrading your upvc door handles to a higher security standard like a Sold Secure SS301 set or 2* Kitemark security handles. This will enhance the security of your home and make it easier to operate your door. The price of these sets might be a bit more expensive, but the security and peace of mind security is worth it. Having to constantly push the handle of the door up and down in order to open and shut it is not something you want to be doing.

Change the Lock

The security of your uPVC lock could be a weak point for thieves. You may want to upgrade your uPVC door to a multipoint lock to ensure it is secure. This would include an open hook and deadbolts to deter burglars. A professional locksmith can assist you with this, but it is also possible to complete the work yourself. You'll require several tools, but the process is simple and fast.

The first step is to loosen the screws that hold the handle in place. You can remove the screws using a screwdriver and store them in a secure place. Then, you can lift the handle and expose the screw that holds the cylinder. You can remove this screw and replace it with a a new one. Make sure the screw is exactly the same size as the original. It should be aligned properly with the lock barrel.

Making changes to the lock of your upvc door replacement lock can be intimidating. It is essential to the security of your home. If you make a mistake, it could cause you to be unable to open the door. However, if you know how to do it, the process is fairly simple and costs much less than hiring a locksmith.

To change the lock on your uPVC door, you will have to get access to the inside faceplate of the lock. You must be able see the screw on the inside of the door and the bolt that holds it on the outside of the door. Once you have these screws in your hands, you can remove and replace the faceplate.

It is possible to replace the lock of your uPVC door for several reasons. It could be because you lost your key, a tenant has moved out but did not return the keys, or you simply want to increase the security of your home.

Anyone with a basic level of DIY skills can change the mechanism of a uPVC lock. If the lock is stuck, you'll need to inspect the hinges within the mechanism. If the hinges have been lubricated, it should be an easy fix. If you're not sure that it will be a simple fix, seek out a professional.